-
All Categories
all-categories
-
Thermostatic Actuators
Thermal actuators are designed to respond to a specified temperature range for heating, cooling, or control/activation applications. Utilizing our exclusive Thermoloid® paraffin wax, the actuator piston retracts or expands based on temperature.
In its “cold position" the wax is solid and the piston is retracted. As temperature increases to within the valve's pre-determined active range, the wax changes into its liquid phase, causing the piston to extend, producing usable stroke and putting the actuator into its “hot position." This piston movement can be used to push/pull, open/close or move a load based on temperature. -
Thermostatic Mixing and Diverting Valves
Our Thermal Bypass Valves (TBVs) maintain optimal system temperature by monitoring the inlet flow and diverting the fluid based on temperature, thereby reducing system wear, minimizing warm up times, and extending component life. When the fluid temperature is above the valve's set-point, the TBV automatically diverts flow to the system's cooler or heat exchanger. When the fluid temperature is below the set-point, the flow is bypassed directly to the reservoir and continues to circulate through the system.
Innovatively designed, our TBVs can also be used in mixing applications where controlled outlet temperature is required, modulating between “hot" and “cold" inlet ports, to produce the desired outlet temperature. - Freeze and Scald Protection Control Valves
-
Temperature Control Valves for Pumps and Pump Seals
ThermOmegaTech® offers a variety of self-operating, thermal relief valves to protect a variety of pumps and mechanical seals from over temperature damage and prevent scalding.
-
Instrument and Process Temperature Control Valves
Compact and reliable thermostatic valves used for heating, cooling, or control/activation applications. 100% mechanical these valves rely solely on fluid or ambient temperature to operate.
ThermOmegaTech®’s QMS is certified to the AS9100 D Standards. -
Washdown Systems for Production Facilities
ThermOmegaTech® offers a variety of high temperature washdown systems and maintenance equipment to protect industrial production facilities against contamination.
ThermOmegaTech®’s QMS is certified to the AS9100 D Standards. -
Thermostatic Temperature Control for Emergency Equipment
Emergency safety showers and eyewash stations are a necessity in any facility where chemical spills are a potential threat. ThermOmegaTech® provides Tepid Water Solutions to ensure these emergency fixtures meet OSHA requirements at all times.
ThermOmegaTech®’s QMS is certified to the AS9100 D Standards.